SNGN (CBN)

Product information

Add references for which you want a devis

  Order reference Availability
+ Add to quote Order reference CBN 07S CBN 07SX
+ Add to quote 75 SNGN 090304 Delivery time: Consult us Delivery time: Consult us
+ Add to quote 75 SNGN 090308 Delivery time: Consult us Delivery time: Consult us

Complementary informations

  • GUIDE GRADES
  • Applications
  • Cutting parameters information purposes only
Grades Characteristics Applications
07S (Solid CBN insert) Excellent wear resistance and chemical stability Ni-hard cast iron
Hard cast iron cylinder liners
High chrome alloy steels Powder metal alloys
Perlitic cast iron
Brake rotors disks
Depth of cut up to 4mm
07SX (Solid CBN insert) High abrasive wear resistance Heat and chemical wear resistance
Excellent impact toughness
Performance achieved at higher speeds
High chrome and Ni Iron Alloys (white iron)
Turning steel rolls
Impellers and slurry pump machining
Depth of cut up to 5mm
Materials Cutting conditions
Materials Roughing Finishing Finishing Finishing
Soft cast iron perlitic CBN 01 - CBN 07S - CBN 07SX CBN 02 - CBN 08 CBN 01- CBN 02 - CBN 08 CBN 02 - CBN 08
High-tensile cast iron CBN 01 - CBN 07S - CBN 07SX CBN 01 CBN 01 CBN 01
Hard steel CBN 01 - CBN 07S - CBN 07SX CBN 02 - CBN 08 CBN 01- CBN 02 - CBN 08 CBN 01
Super hardened alloy steel CBN 01 - CBN 07S - CBN 07SX CBN 01 CBN 01 CBN 01
Sintering hard metal powder CBN 01 - CBN 07S - CBN 07SX CBN 01 CBN 01 CBN 01
Materials Parametres Cutting conditions
Materials Parametres CBN 07S CBN 07SX
Soft cast iron perlitic Cutting speed 600-1200 m/min 600-1200 m/min
Soft cast iron perlitic Feed rate 0.1-0.5 mm/rev 0.1-0.5 mm/rev
Soft cast iron perlitic Depth of cut 0.1-2.5 mm 0.1-2.5 mm5 mm
High-tensile cast iron Cutting speed 40-100 m/min 40-100 m/min
High-tensile cast iron Feed rate 0.1-0.5 mm/rev 0.1-0.5 mm/rev
High-tensile cast iron Depth of cut 0.2-2.5 mm 0.2-2.5 mm
Hard steel Cutting speed 65-105 m/min 65-105 m/min
Hard steel Feed rate 0.1-0.5 mm/rev 0.1-0.5 mm/rev
Hard steel Depth of cut 0.6-2.5 mm 0.6-2.5 mm
Super hardened alloy steel Cutting speed 125-250 m/min 125-250 m/min
Super hardened alloy steel Feed rate 0.2-0.4 mm/rev 0.2-0.4 mm/rev
Super hardened alloy steel Depth of cut 0.2 -1.5 mm 0.2 -1.5 mm
Sintering hard metal powder Cutting speed 90-180 m/min 90-180 m/min
Sintering hard metal powder Feed rate 0.1-0.25 mm/rev 0.1-0.25 mm/rev
Sintering hard metal powder Depth of cut 0.1-1.3 mm 0.1-1.3 mm