Product information
Add references for which you want a devis
| Order reference | Shank diameter (D) | Caratage | |
|---|---|---|---|
| 40 015 060 070 | 6 | 0,15 | |
| 40 025 060 070 | 6 | 0,25 | |
| 40 015 080 070 | 8 | 0,15 | |
| 40 025 080 070 | 8 | 0,25 | |
| 40 050 080 070 | 8 | 0,5 | |
| 40 075 080 070 | 8 | 0,75 | |
| 40 015 100 070 | 10 | 0,15 | |
| 40 025 100 070 | 10 | 0,25 | |
| 40 050 100 070 | 10 | 0,5 | |
| 40 075 100 070 | 10 | 0,75 | |
| 40 100 100 070 | 10 | 1 | |
| 40 015 120 070 | 12 | 0,15 | |
| 40 025 120 070 | 12 | 0,25 | |
| 40 050 120 070 | 12 | 0,5 | |
| 40 075 120 070 | 12 | 0,75 | |
| 40 100 120 070 | 12 | 1 | |
| Other dimensions on request |
Complementary informations
Feed calculation for a single point diamond dresser:
Vd = 1/2 * Grit size [mm] * Ns [1/min] à 1 * Grit size [mm] * Ns [Tr/min]
Example :
Grain FEPA 80 = 180 μm ==> 0.18mm
Ns : 1410 tr/min
Vd = 1/2 * 0.180 * 1410 = 130 mm/min
Vd = 0.18 * 1410 = 260 mm/min
Vd = 130 – 260 mm/min
The shank must be as short as possible.
The shank must be positioned with a -3° to -10° vertical angle and a 3° to 15° lateral angle.
When a flat appears at the top of the diamond, turn the shank of 90° before continuing the dressing operation
