Product information
Add references for which you want a devis
| Order reference | Grit size | Active diameter (P) | Bond | |
|---|---|---|---|---|
| 50 3262 07 P3 CM1 | 7 | Ø8 | P3 | |
| 50 3262 08 P3 CM1 | 8 | Ø8 | P3 | |
| 50 3262 10 P2 CM1 | 10 | Ø8 | P2 | |
| 50 3262 12 P2 CM1 | 12 | Ø8 | P2 | |
| 50 3263 07 P3 CM1 | 7 | Ø10 | P3 | |
| 50 3263 08 P3 CM1 | 8 | Ø10 | P3 | |
| 50 3263 10 P2 CM1 | 10 | Ø10 | P2 | |
| 50 3263 12 P2 CM1 | 12 | Ø10 | P2 |
Complementary informations
- Bond P1 : Very good wear resistant bond
- Bond P2 : Good wear resistant bond
- Bond P3 : Usual wear resistant bond
- Bond P4 : Friable wear resistant bond
- Grain 03 : Small grain size
- Grain 07 : Fine to medium grain size
- Grain 08 : Medium grain size
- Grain 10 : Medium to coarse grain size
- Grain 12 : Coarse grain size
Careful! The feed has to be between 700 and 1000 mm/min
The multi grain dresser has to be perpendicular to the wheel axis.
For ØP = < 3mm ==> Vd = (Ns * ØP) / 4
For ØP = > 3 mm ==> Vd = (Ns * ØP * 0.35) / 4
Ns = Number of rev / min of the wheel
Dressing infeed: 0.01 à 0.04 mm
Cooling: By applying sufficient coolant you will achieve longer tool life !
To avoid machine vibrations the holder should be kept as short as possible.
