Product information
Add references for which you want a devis
Order reference | Grit size | Length A | Height of diamond B | Width C | |
---|---|---|---|---|---|
50 3320 08 P2 | 8 | 28 | 10 | 10 | |
50 3320 09 P2 | 9 | 28 | 10 | 10 | |
50 3320 11 P2 | 11 | 28 | 10 | 10 | |
50 3320 12 P2 | 12 | 28 | 10 | 10 | |
50 3321 08 P2 | 8 | 33 | 15 | 10 | |
50 3321 09 P2 | 9 | 33 | 15 | 10 | |
50 3321 11 P2 | 11 | 33 | 15 | 10 | |
50 3321 12 P2 | 12 | 33 | 15 | 10 | |
50 3322 08 P2 | 8 | 28 | 10 | 15 | |
50 3322 09 P2 | 9 | 28 | 10 | 15 | |
50 3322 11 P2 | 11 | 28 | 10 | 15 | |
50 3322 12 P2 | 12 | 28 | 10 | 15 | |
50 3323 08 P2 | 8 | 28 | 10 | 20 | |
50 3323 09 P2 | 9 | 28 | 10 | 20 | |
50 3323 11 P2 | 11 | 28 | 10 | 20 | |
50 3323 12 P2 | 12 | 28 | 10 | 20 | |
50 3324 08 P2 | 8 | 33 | 15 | 20 | |
50 3324 09 P2 | 9 | 33 | 15 | 20 | |
50 3324 11 P2 | 11 | 33 | 15 | 20 | |
50 3324 12 P2 | 12 | 33 | 15 | 20 | |
Other dimensions on request |
Complementary informations
- Bond P1 : Very good wear resistant bond
- Bond P2 : Good wear resistant bond
- Bond P3 : Usual wear resistant bond
- Bond P4 : Friable wear resistant bond
- Grain 03 : Small grain size
- Grain 07 : Fine to medium grain size
- Grain 08 : Medium grain size
- Grain 10 : Medium to coarse grain size
- Grain 12 : Coarse grain size
In overall:
The grain dressing plate has to be fixed so that its back touches the wheel with a 30° to 40° angle. It also has to work parallel to the axis of the wheel.
A consistent cooling allow a perfect dressing and enhance the tool life.
You can adjust the roughness by modifying the feed.
Dressing infeed = 0.005 à 0.02 mm
Feed: Vd = (Ns * 0.9) / 4 with Ns = Number of rev / min of the wheel