Impregnated hand dressers type 1

Product information

Add references for which you want a devis

  Order reference Grit size Active diameter Height of diamond Bond
+ Add to quote 50 1886 01 P3 D64 8 8 P3
+ Add to quote 50 1886 02 P3 D151 8 8 P3
+ Add to quote 50 1886 03 P3 D126 8 8 P3
+ Add to quote 50 1886 04 P3 D181 8 8 P3
+ Add to quote 50 1886 05 P3 D301 8 8 P3
+ Add to quote 50 1886 06 P3 D357 8 8 P3
+ Add to quote 50 1886 07 P3 D427 8 8 P3
+ Add to quote 50 1886 08 P3 D602 8 8 P3
+ Add to quote 50 1886 09 P3 D711 8 8 P3
+ Add to quote 50 1886 10 P3 D852 8 8 P3
+ Add to quote 50 1886 11 P3 D1001 8 8 P3
+ Add to quote 50 1886 12 P3 D1181 8 8 P3

Complementary informations

  • Grit size / Bond
  • Dressing with multi grain dresser
  • Bond P1 : Very good wear resistant bond
  • Bond P2 : Good wear resistant bond
  • Bond P3 : Usual wear resistant bond
  • Bond P4 : Friable wear resistant bond
  • Grain 03 : Small grain size
  • Grain 07 : Fine to medium grain size
  • Grain 08 : Medium grain size
  • Grain 10 : Medium to coarse grain size
  • Grain 12 : Coarse grain size

Careful! The feed has to be between 700 and 1000 mm/min
The multi grain dresser has to be perpendicular to the wheel axis.

For ØP = < 3mm ==> Vd = (Ns * ØP) / 4

For ØP = > 3 mm ==> Vd = (Ns * ØP * 0.35) / 4

Ns = Number of rev / min of the wheel

Dressing infeed: 0.01 à 0.04 mm

Cooling: By applying sufficient coolant you will achieve longer tool life !

To avoid machine vibrations the holder should be kept as short as possible.